Flour mills are divided into steel flour mills and stone flour mills. Each machine has its own advantages. For example, a steel flour mill can grind buckwheat, while others can only grind wheat and corn. The same applies to stone flour mills. The mill can process all kinds of grains.

磨石機的研磨部分采用高硬度白砂巖，其中含有多種微量元素和礦物質，在研磨過程中不會產生熱量。它是低溫面粉加工的一部分。在面粉加工過程中，它不會損害面粉中的營養成分。

The grinding part of the grinder adopts high hardness white sandstone, which contains a variety of trace elements and minerals, and will not generate heat in the grinding process. It is part of low-temperature flour processing. In the process of flour processing, it will not damage the nutrients in flour.

石磨的輕量化具有功耗低、研磨平穩的優點，科學的施工可以將機器與石磨有機結合，占地面積小，操作方便，成本低。

The light weight of the stone mill has the advantages of low power consumption and stable grinding. Scientific construction can organically combine the machine with the stone mill, with small floor area, convenient operation and low cost.

石磨可以加工多種谷物，不僅僅是小麥。因此，這種類型的石磨包括豆腐石磨、面粉石磨、大米石磨、芝麻糊石磨、花生醬磨、家用手工豆?jié){磨。

Stone mills can process a variety of grains, not just wheat. Therefore, this type of stone mill includes tofu stone mill, flour stone mill, rice stone mill, sesame paste stone mill, peanut butter mill and household manual soybean milk mill.

面粉機械設備溫度異常升高的原因是什么？石磨面粉機設備在正常使用時，有時會發現儲存溫度突然升高，儲存溫度一定會提高加工效果。

What are the reasons for the abnormal temperature rise of flour machinery and equipment? When the stone mill flour mill equipment is in normal use, it is sometimes found that the storage temperature rises suddenly, and the storage temperature will certainly improve the processing effect.

如何或避免庫存的異常溫升？

How to solve or avoid abnormal temperature rise of inventory?

如果在早期使用，就會出現這樣的問題。面粉機械和設備的安裝很可能會出現問題這是e、 g.主傳動密度不夠，皮帶過密，耗氣量大，物料易受熱等，不利于機械功耗如果工作人員為了盡可能避免這種情況，除了保證機械質量外，還應保證所用零件及其之間的協調。

If used at an early stage, such problems will arise. The installation of flour machinery and equipment is likely to have problems. This is e and g. the density of main drive is not enough, the belt is too dense, the air consumption is large, and the materials are easy to be heated, which is not conducive to the power consumption of machinery. In order to avoid this situation as far as possible, the staff should not only ensure the quality of machinery, but also ensure the coordination between the parts used and them.

也可能是制粉機的安裝精度不符合要求，對于成套滑動軸承制粉設備，在裝配時，磨輥兩端軸承孔與軸規之間容易出現異波現象。這樣，制粉機空轉時負荷功率大，工作時易發熱，嚴重時易燒瓦，制粉機不工作，必須盡快調整。

It may also be that the installation accuracy of the pulverizer does not meet the requirements. For the complete set of sliding bearing pulverizing equipment, abnormal waves are easy to appear between the bearing holes at both ends of the grinding roller and the shaft gauge during assembly. In this way, when the pulverizer is idling, the load power is large, it is easy to heat when working, and it is easy to burn tiles when it is serious. If the pulverizer does not work, it must be adjusted as soon as possible.

為了避免這種現象，建議石磨面粉機滑動軸承替換。這樣可以降低失敗的可能性同時提醒員工購買機器不能盲目控制成本，只有提高粉磨效率和粉磨效果，才是提高收入的有效途徑。

In order to avoid this phenomenon, it is recommended to replace the sliding bearing of stone flour mill. This can reduce the possibility of failure and remind employees that they can't blindly control the cost when buying machines. Only by improving the grinding efficiency and grinding effect is the effective way to improve the income.